Interfaces; Loudspeaker; Nonvolatile Ram (Nv-Ram) - Wincor Nixdorf BEETLE /L User Manual

Modular pos system

Table of Contents

CPU

Interfaces

The COM1 interface of the BEETLE /L is designed for connecting

standard peripherals that have a separate power supply. The COM2*,

COM3* and COM4* are provided for connecting special POS

peripherals that do not have a separate power supply, for example a

scanner or a display. The BEETLE /L is also equipped with a parallel

interface and a DC24 /2A power supply interface for connecting POS

printers as well as two mini DIN jacks for connecting the keyboard and

cash drawer.

A loudspeaker is connected to the CPU. The volume of the

loudspeaker can be set using the rotary knob on the rear panel of the

modular POS system. The loudspeaker is located on the left-hand side

of the rear panel (see Page GB - 18).

This memory chip can be used to store important data - such as sales

totals or diagnostic entries - by means of the appropriate software and

independently of the power supply. The data is retained for more than

five years.

GB - 36

Connect only devices approved by Wincor Nixdorf to

your BEETLE /L. If you have any questions, contact the

Wincor Nixdorf branch office responsible for your area.

BEETLE /L - the components

Table of Contents