Table of Contents
Advertisement
POWER SUPPLY
No tes
Never bend a disk.
Never write on a disk with a hard object, like a ball-point pen or pencil
and never fix a label directly on the disk.
Do not expose disks to direct sunlight and avoid storing them in areas
subject to high temperatures or humidity.
Never touch the surface of the disk. Always handle by their edges.
For best results, periodically wipe each disk with a soft, dry cloth, gently
rubbing outward from center.
Never use fluids such as petrol, record cleaning or anti-static fluid. Use
of such fluids can damage the disk.
Power Supply
The power supply automatically adjusts itself to the particular voltage. The
power output of the power supply is maximum 245 W.
The power cord receptacle, and the ON/OFF switch are located on the back
of the power supply. At the front side of the box you will find the ON button
which will turn on the system if the ON/OFF switch at the rear side of the
external power supply is in the position ON. Pushing (approx. 5 seconds)
the ON button at any time will change the system into the stand-by function.
The proper function of the On button at the front is defined by the settings of
the operating system and the BIOS.
0
1
100-120 V / 2 A max
200-240 V / 1 A max
MIC
ON/OFF switch
26
DC24V
1
CASHDR ONLY
KYBD
COM1
COM2*
TFT A
LPT1
B
A
USB
COM3*
COM4*
LAN
SPK
Advertisement
Table of Contents
