Connecting To The Mains Power Supply - Wincor Nixdorf BEETLE /XL User Manual

The individual POS system

Connecting to the mains power supply

All devices belonging to the modular BEETLE /XL POS system that have a
separate power cable must be connected to the same electric circuit.
Ensure that the power switch on the POS system housing is off.
Make sure that all data cables on the system unit and periphe-
rals are connected correctly.
Plug all power cables belonging to the BEETLE and the periphe-
rals into the grounded-contact utility power sockets.
Slide
Lock
On/Off switch
The power supply unit can be connected to all
conventional power supply networks. It adapts
automatically to the voltage supplied. A fan keeps it
cool. The power-supply unit has a maximum output
of 180W.
Cabling the BEETLE /XL
You can now use the
power switch on the
front of the BEETLE
to switch it on. You
may have to unlock
the slide cover and
slide it to the left
before you can do
this.
GB - 15