Connecting To The Mains Power Supply - Wincor Nixdorf Beetle/60 User Manual

POS terminal and system

Connecting to the mains power supply

All devices belonging to the BEETLE POS system that have a separate
power cable must be connected to the same electric circuit.
Ensure that the power switch on the POS terminal housing is
switched off.
Make sure that all data cables on the system unit and peripherals are
connected correctly.
Plug all power cables belonging to the peripherals and the BEETLE
into the grounded-contact utility power sockets.
The power-supply unit of the BEETLE POS system adapts itself
to the local system voltage so that you do not have to make any
adjustments yourself.
The power output of devices connected to the BEETLE system
must not be more than 200 V AC.
Connecting to the mains power supply
Connecting to the mains power supply
Rubber socket
Rubber connector
Power switch
You can now switch
on the power switch
at the rear of the
housing (position I).
GB - 13