Connecting To The Mains Power Supply; Basic Settings - Wincor Nixdorf BEETLE NetPOS User Manual

BEFORE SWITCHING ON THE SYSTEM
rear side until it is fixed in the second pin ‚ on the back of the BEETLE
box.
In doing so, ensure that the cable cover does not fit askew.

Connecting to the mains power supply

All devices belonging to the modular BEETLE NetPOS system that have a
separate power cable must be connected to the same electric circuit.
Make sure that all data cables on the system unit and peripherals are
n
connected correctly.
Make sure that the DC cable is connected to power supply and to
n
system unit.
Plug all power cables belonging to the BEETLE and the peripherals into
n
the grounded-contact power sockets.
ON/OFF button
The power supply can be connected to all standard power supply networks.
The unit adjusts automatically to the respective voltage. The maximum
output of the power pack is 150 W.

Basic settings

Ex works, the BEETLE NetPOS is configured to your order. Your
configuration must be subsequently adapted to support supplementary
devices such as scanners. For more information, contact the WN branch
office responsible for your area.
14
ON/OFF switch
You can now switch on
the BEETLE NetPOS by
means of the switch on
the external power
supply. Push the ON/OFF
button at the front of the
box.