Table of Contents
Advertisement
No.
Component
7
<Interrupt> button
8
<Clear All> button
9
<Stop> button
10
<Start> button
11
<Main Power> indicator
12
<Error> indicator
13
<Data> indicator
14
<Speed Dial> button
15
<C (Clear)> button
16
<Dial Pause> button
17
Numeric keypad
18
<Custom Button 1> (Copy)
19
<Custom Button 2> (Not in
Use)
Press this button to suspend a copy or print job in progress to have the
machine process another job. During the Interrupt mode, the <Interrupt>
button lights up. Pressing the <Interrupt> button again exits the Interrupt
mode and resumes the suspended job.
Some types of jobs cannot be executed in the Interrupt mode. Refer to "16 Appendix" >
"Notes and Restrictions" > "Notes and Restrictions on the Interrupt Mode" in the
Administrator Guide.
Returns the settings you made to the default values. The machine returns to
the same state as when it is powered on.
Press this button to pause the current copy job or communications.
Press this button to start scanning a document.
Lights up when the main power is switched on.
Note
• If the main power is not switched on, the machine will not be powered on
even when the power is switched on.
Blinks if a system error occurs.
This indicator lights up when a problem other than a system error occurs
with the machine, including paper jams and running out of paper or toner.
If the <Error> indicator blinks, contact our Customer Support Center.
If the <Error> indicator lights up, refer to "15 Problem Solving" in the Administrator Guide.
Blinks when the machine is sending or receiving data to or from a client.
This indicator lights up when data is being stored in the machine's memory,
when received faxes are waiting to be printed, or when faxes are being
stored in a folder.
You can check stored scan files in a Folder List. For information on the Folder List, refer to "4
Machine Status" > "Machine Information" > "Print Reports" > "Folder List" in the
Administrator Guide.
You can check stored fax files in a Stored File List. For information on the Stored File List, refer
to "4 Machine Status" > "Machine Information" > "Print Reports" > "Job Status/Activity
Report" > "Stored File List" in the Administrator Guide.
You can change the blink pattern of the <Data> indicator. For more information, refer to "5
Tools" > "Common Service Settings" > "Other Settings" > "Data Indicator" in the Administrator
Guide.
Press this button to specify a recipient with an address number when
sending a fax or e-mail.
Press this button to cancel a numerical value you have entered with the
numeric keypad.
Press this button to insert a pause into a destination number.
Use the numeric buttons on the keypad to enter the number of copies,
passcodes, and other numerical values.
"Copy" is assigned to this button by default.
Press this button to display the [Copy] screen.
For information on how to assign a service to the button, refer to "1 Before Using the
Machine" > "Customizing the Control Panel" > "Assigning Services to the Custom Buttons" in
the Administrator Guide.
"Fax" is assigned to this button by default when the Fax service is available
to the model. Press this button to display the [Fax] screen. If the Fax service
is not available, no service is assigned to this button by default.
For information on how to assign a service to the button, refer to "1 Before Using the
Machine" > "Customizing the Control Panel" > "Assigning Services to the Custom Buttons" in
the Administrator Guide.
Function
Control Panel
2
85
Advertisement
Table of Contents
