Rest Day - Sanremo ROMA TCS SED Instruction Booklet

ENGLISH
AUTO ON/OFF - AUTOMATIC SWITCHING ON/OFF
Allows you to define the times for automatically switching the doser on and off and the weekly closing day.
the display shows:
The following are programmed in this order:
- switch-on hour (AAA = On)
- switch-on minute (AAA = On)
- switch-off hour (AAA = Off)
- switch-off minute (AAA = Off)

- rest day

To pass from one to the other, press the button K5GR1. You can set 1 switch-on and 1 switch-off and these apply to every day of the week.
If you do not want automatic switching on or off, you must go to the programming of the corresponding time and press K1GR1 (+) or K2GR1 (-)
until the display appears as follows:
the display shows:
or
the display shows:
(pressing K2GR1 (-) when the display shows the hour 00 or pressing K1GR1 (+) when it indicates the hour 23).
In this case:
- if switch-on has been disabled, switch-off and the rest day are also automatically disabled; pressing K5GR1 skips the respective settings and moves
directly to the next parameter. Switching on and off can therefore be done only by hand with the procedure described in the previous paragraph.
- if switch-on is enabled, pressing K5GR1 moves on to the setting of switch-off and then to the rest day, if necessary.
REST DAY
It is possible to define a weekly rest day, on which the doser ignores automatic switch-on and can be switched on only by hand.
Instead, automatic switch-off is active also on the rest day.
the display shows:
Using K1GR1 (+) or K2GR1 (-) select the day (XXX).
If you do not want to set a rest day you must select "------------".
It is possible to set only one rest day.
READING CONSUMPTION, LITRES, MAINTENANCE
With the display showing:
pressing the button K5GR1 again takes you to reading of the counts:
the display shows:
the display shows:
the litres used up to that moment are shown.
press the button K5GR1 to move on to the number of cycles carried out up to that moment.
the display shows:
press the button K5GR1 and the total number of coffees distributed up to that moment is shown.
the display shows:
press the button K5GR1 to review all the counts and the totals of the individual doses of each group are shown.
Auto ON/OFF
aaa : hh.mm
Auto On/Off
On : --.--
Auto On/Off
Off : --.--
Closed On
xxxxxxxx
Clock adjust
Counters
Litres
xxxxx
Service
xxxxx
Coffees total
xxxxx
60
press the button K3GR1 (ENTER) to confirm