[Network] Menu; [Digital Link Mode]; [Digital Link Status]; [Auto] - Panasonic PT-FZ570 Operating Instructions Manual

[NETWORK] menu

On the menu screen, select [NETWORK] from the main menu, and select an item from the sub-menu.
Refer to "Navigating through the menu" ( x page 57) for the operation of the menu screen.
Note
f The on-screen menu (menu screen) of the projector has not the network setting about the wireless LAN. When the wireless module (Model
No.: ET-WML100) of the optional accessories is inserted to the projector, please set the wireless LAN by accessing the projector via a
computer. For detailed, please refer to "Web control function" → "[Network config] page" → "Wireless LAN" ( x page 119).

[DIGITAL LINK MODE]

Switch the communication method of the <DIGITAL LINK/LAN> terminal of the projector.
1) Press as to select [DIGITAL LINK MODE].
2) Press qw to switch the item.
f The items will switch each time you press the button.

[AUTO]

[DIGITAL LINK]
[LONG REACH]
[ETHERNET]
Possible communication modes
l : Communication possible
―: Communication not possible
Setting
For DIGITAL LINK
[AUTO] For long reach
For Ethernet
[DIGITAL LINK]
[LONG REACH]
[ETHERNET]
Note
f The maximum transmission distance when connected with the long-reach communication method is 150 m (492'2"). However, the signal
that the projector can receive is only up to 1080/60p (1 920 x 1 080 dots, dot clock frequency:148.5 MHz).
f When the communication method of the twist-pair-cable transmitter is set to long reach, it will connect with long-reach communication
method when [DIGITAL LINK MODE] is set to [AUTO]. To connect with the optional DIGITAL LINK Switcher (Model No.: ET-YFB200G) with
the long-reach communication method, set [DIGITAL LINK MODE] to [LONG REACH].
f It will not connect correctly if the twist-pair-cable transmitter is not supporting the long-reach communication method even if [DIGITAL LINK
MODE] is set to [LONG REACH].

[DIGITAL LINK STATUS]

Display DIGITAL LINK connection environment.
1) Press as to select [DIGITAL LINK STATUS].
2) Press the <ENTER> button.
f The [DIGITAL LINK STATUS] screen is displayed.
[LINK STATUS]
[HDCP STATUS]
Chapter 4 Settings — [NETWORK] menu
Switches the communication method automatically to DIGITAL LINK, long reach or Ethernet.
Fixes the communication method to DIGITAL LINK.
Fixes the communication method to long reach.
Fixes the communication method to Ethernet.
Image transmission
(100 m (328'1"))
l
―
―
l
―
―
Either [NO LINK], [DIGITAL LINK], [LONG REACH] or [ETHERNET] is displayed.
Either [NO SIGNAL], [OFF], or [ON] is displayed.
Communication possible
Image transmission
Ethernet
(150 m (492'2"))
―
l
―
―
l
―
RS-232C
l l
l l
―
l
l l
l l
―
l
ENGLISH - 101