Main Menu; Sub-Menu - Panasonic PT-FZ570 Operating Instructions Manual

Note
f Pressing the <MENU> button while the menu screen is displayed to return the previous menu. You can operate in the same way by pressing
the <RETURN> button.
f Some items may not be adjusted or used for certain signal formats to be input to the projector. The menu items that cannot be adjusted or
used are shown in gray characters, and they cannot be selected. [DIGITAL CINEMA REALITY] and [FRAME LOCK] may not be displayed
depending on the input signal.
f Some items can be adjusted even if signals are not input.
f Individual adjustment screen is cleared automatically if no operation is performed for approximately five seconds.
f For menu items, refer to "Main menu" (
Resetting adjustment values to the factory default
If the <DEFAULT> button on the remote control is pressed, the values adjusted in the menu items are restored to
the factory default settings.
button
1) Press the <DEFAULT> button on the remote control.
Note
f You cannot reset all the settings to the factory default at a time.
f To reset all the settings adjusted in the sub-menu item to the factory default at a time, execute the [PROJECTOR SETUP] menu → [INITIALIZE
Æ
ALL]. ( page 97)
f Some items cannot be reset by pressing the <DEFAULT> button. Adjust each item manually.

Main menu

The following items are in the main menu.
When a main menu item is selected, the screen changes to a sub-menu selection screen.
Main menu item
[PICTURE]
[POSITION]
[LANGUAGE]
[DISPLAY OPTION]
[PROJECTOR SETUP]
[SECURITY]
[NETWORK]

Sub-menu

The sub-menu of the selected main menu item is displayed, and you can set and adjust items in the sub-menu.
58 - ENGLISH
Chapter 4 Settings — Menu navigation
Æ Æ
page 58) and "Sub menu" ( page 58).
Page
61
66
75
76
87
98
101