Panasonic PT-FZ570 Operating Instructions Manual page 152

Note
f The model numbers of accessories and optional accessories are subject to change without prior notice.
r Terminal
<COMPUTER 1 IN> terminal
<COMPUTER 2 IN /1 OUT>
terminal
<VIDEO IN> terminal
<HDMI 1 IN>/<HDMI 2 IN>
terminal
<AUDIO IN 1>/<AUDIO IN 2>
terminal
<AUDIO IN 3> terminal
<VARIABLE AUDIO OUT>
terminal
<SERIAL IN> terminal
<DIGITAL LINK/LAN> terminal
<LAN> terminal
<WIRELESS> terminal
<DC OUT> terminal
r Applicable scanning frequency
Refer to "List of compatible signals" ( x page 149) for the types of video signals that can be used with the
projector.
For video signal
For Y/C signal
For RGB signal
For YC C /YP P signal
B R B R
For HDMI signal
*1 Pixel-Repetition signal (dot clock frequency 27.0 MHz) only
Note
f DIGITAL LINK input compatible signal is the same as HDMI input compatible signal.
152 - ENGLISH
Chapter 7 Appendix — Specifications
1 set high-density D-Sub 15 p (female)
RGB signal
0.7 V [p-p] 75 Ω (SYNC ON GREEN: 1.0 V [p-p] 75 Ω)
SYNC/HD
VD
(The SYNC/HD and VD terminals do not support 3 value SYNC.)
YP P signal Y: 1.0 V [p-p] including synchronization signal, P
B R
Y/C signal Y: 1.0 V [p-p], C: 0.286 V [p-p] 75 Ω
1 set, high-density D-Sub 15 p (female)
RGB signal 0.7 V [p-p] 75 Ω (SYNC ON GREEN: 1.0 V [p-p] 75 Ω)
SYNC/HD
VD
(The SYNC/HD and VD terminals do not support 3 value SYNC.)
YP P signal Y: 1.0 V [p-p] including synchronization signal, P
B R
1 set, pin jack 1.0 V [p-p] 75 Ω
2 sets, HDMI 19 pin, HDCP compatible, Deep Color compatible
Audio signal Linear PCM (Sampling frequency: 48 kHz/44.1 kHz/32 kHz)
2 sets, M3 stereo mini jack 0.5 V [rms], input impedance 22 kΩ or more
1 set, pin jack x 2 (L-R) 0.5 V [rms], input impedance 22 kΩ or more
1 set, M3 stereo mini jack (monitor output, stereo compatible)
0 V [rms] to 2.0 V [rms] (variable), output impedance 2.2 kΩ or less
1 set, D-Sub 9 p, RS-232C compliant, for computer control
1 set, RJ-45, for network, DIGITAL LINK connection, PJLink compatible, 100Base-TX
1 set, RJ-45, for network connection, PJLink compatible, 10Base-T/100Base-TX
USB connector (type A) x 1, for the Wireless module (Model No.: ET-WML100) only
USB connector (type A) x 1, for power supply only (DC 5 V, maximum 900 mA)
Horizontal : 15.73 kHz Vertical : 59.94 Hz, Horizontal : 15.63 kHz Vertical : 50 Hz
Horizontal : 15.73 kHz Vertical : 59.94 Hz, Horizontal : 15.63 kHz Vertical : 50 Hz
f Displayable resolution: 640 x 400 to 1 920 x 1 200
f Dot clock frequency: 162 MHz or less
f Displayable resolution: 480i/576i to 1 920 x 1 080
f Dot clock frequency: 148.5 MHz or less
f Displayable resolution for movie-based signals: 480i/576i
Displayable resolution for still image signals: 640 x 400 to 1 920 x 1 200 (non-interlaced)
f Dot clock frequency: 25 MHz - 162 MHz
TTL high impedance, automatic positive/negative
polarity compatible
TTL high impedance, automatic positive/negative
polarity compatible
P : 0.7 V [p-p] 75 Ω
B R
TTL high impedance, automatic positive/negative
polarity compatible
TTL high impedance, automatic positive/negative
polarity compatible
P : 0.7 V [p-p] 75 Ω
B R
*1
to 1 920 x 1 080