Connecting Terminals - Panasonic PT-FZ570 Operating Instructions Manual

r Connecting terminals
1
7
1 <WIRELESS> terminal
Insert the optional wireless module (Model No.: ET-WML100)
directly to this terminal when using the wireless LAN function.
2 <COMPUTER 2 IN/1 OUT> terminal
This is the terminal to input RGB signals or YC
signals, also to output the <COMPUTER 1 IN> RGB signals
and YC C /YP P signals, which is input to the terminal.
B R B R
3 <COMPUTER 1 IN> terminal
This is the terminal to input RGB signals, YC
or Y/C signals.
4 <HDMI 1 IN> terminal/<HDMI 2 IN> terminal
This is the terminal to input HDMI signals.
5 <LAN> terminal
This is the LAN terminal to connect to the network.
6 <DIGITAL LINK/LAN> terminal
This is the LAN terminal to connect to the network. This is also
used when connecting a video signal transmission device via
the LAN terminal.
Attention
f When a LAN cable is directly connected to the projector, the network connection must be made indoors.
28 - ENGLISH
Chapter 1 Preparation — About your projector
2 3
8
C /YP P
B R B R
C /YP P signals,
B R B R
4
9 10 11
7 <DC OUT> terminal
This is a USB terminal only for power supply. (DC 5 V,
maximum 900 mA)
This can be used when power is to be supplied to a wireless
display adapter, etc.
8 <SERIAL IN> terminal
This is the RS-232C compatible terminal to externally control
the projector by connecting a computer.
9 <VIDEO IN> terminal
This is the terminal to input video signals.
10 <AUDIO IN 1> terminal/<AUDIO IN 2> terminal/
<AUDIO IN 3> terminal
This is the terminal to input audio. Left input <L> and right input
<R> are provided for the <AUDIO IN 3> terminal.
11 <VARIABLE AUDIO OUT> terminal
This is the terminal to output the input audio signal to the
projector.
5 6