[Display Option] Menu; [On-Screen Display] - Panasonic PT-FZ570 Operating Instructions Manual

[DISPLAY OPTION] menu

On the menu screen, select [DISPLAY OPTION] from the main menu, and select an item from the sub-
menu.
Refer to "Navigating through the menu" ( x page 57) for the operation of the menu screen.

[ON-SCREEN DISPLAY]

Set the on-screen display.
Setting [INPUT GUIDE]
You can set the display method of the name of the input terminal displayed on the top right of the projection
screen.
1) Press as to select [ON-SCREEN DISPLAY].
2) Press the <ENTER> button.
f The [ON-SCREEN DISPLAY] screen is displayed.
3) Press as to select [INPUT GUIDE].
4) Press qw to switch the item.
f The items will switch each time you press the button.
[DETAILED]
[OFF]
[SIMPLE]
[OSD POSITION]
Set the position of the menu screen (OSD).
1) Press as to select [ON-SCREEN DISPLAY].
2) Press the <ENTER> button.
f The [ON-SCREEN DISPLAY] screen is displayed.
3) Press as to select [OSD POSITION].
4) Press qw to switch the item.
f The items will switch each time you press the button as following:
[CENTER] → [UPPER LEFT] → [UPPER RIGHT] → [LOWER LEFT] → [LOWER RIGHT] → [CENTER] → ...
[OSD SIZE]
(Only for PT-FZ570)
Set the size of the menu screen (OSD).
1) Press as to select [ON-SCREEN DISPLAY].
2) Press the <ENTER> button.
f The [ON-SCREEN DISPLAY] screen is displayed.
3) Press as to select [OSD SIZE].
4) Press qw to switch the item.
[NORMAL]
[DOUBLE]
[WARNING MESSAGE]
Set the display/hide of the warning message.
76 - ENGLISH
Chapter 4 Settings — [DISPLAY OPTION] menu
Displays the name of input terminal and input signal graphically.
Disables the input guide.
Displays the name of input terminal and input signal.
Use this setting normally.
Double angle size (height and width will become two times) of [NORMAL].