[Daylight View]; [Digital Cinema Reality]; [Noise Reduction] - Panasonic PT-FZ570 Operating Instructions Manual

[BRIGHTNESS B]

[DAYLIGHT VIEW]

You can correct the image to the optimal vividness even if it is projected under a bright light.
1) Press as to select [DAYLIGHT VIEW].
2) Press qw or the <ENTER> button.
f The [DAYLIGHT VIEW] individual adjustment screen is displayed.
3) Press qw to switch the item.
f The items will switch each time you press the button.
[AUTO]
[OFF]
[1]
[2]
[3]
Note
f When [PROJECTION METHOD] ( x page 88) is set to [REAR/DESK] or [REAR/CEILING], [AUTO] cannot be selected.
f When objects, etc. are placed on the top of the projector, the illuminance sensor enters the shadow and the [AUTO] mode may not function
properly.
f When [PICTURE MODE] is set to [DICOM SIM.], the factory default setting of the [DAYLIGHT VIEW] is [OFF] and the setting values in the
menu screen display in gray.
f When [DAYLIGHT VIEW] is set to [AUTO], [1], [2] or [3], the [SHARPNESS] cannot be adjusted.

[DIGITAL CINEMA REALITY]

You can increase the vertical resolution and enhance the image quality by performing cinema processing when
the PAL (or SECAM) 576i signal, the NTSC 480i signal, and 1080/50i, 1080/60i are input.
1) Press as to select [DIGITAL CINEMA REALITY].
2) Press qw or the <ENTER> button.
f The [DIGITAL CINEMA REALITY] individual adjustment screen is displayed.
3) Press qw to switch the item.
f The items will switch each time you press the button.
[ON]
[OFF]

[NOISE REDUCTION]

(Only when the <VIDEO IN> terminal or <COMPUTER 1 IN>
You can reduce noises when the input image is degraded and noise is occurring in the image signal.
1) Press as to select [NOISE REDUCTION].
2) Press qw or the <ENTER> button.
f The [NOISE REDUCTION] individual adjustment screen is displayed.
3) Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
[1]
[2]
[3]
*1 When [COMPUTER1 INPUT SETTING] is set to [Y/C] (
64 - ENGLISH
Chapter 4 Settings — [PICTURE] menu
Press the w button.
Press the q button.
The brightness of the installation environment is detected by the luminance sensor, and the vividness
of the image is automatically corrected.
No correction.
Corrects the image to weaken vividness.
Corrects the image to medium vividness.
Corrects the image to high vividness.
Performs cinema processing.
Does not perform cinema processing.
No correction.
Slightly corrects the noise.
Moderately corrects the noise.
Strongly corrects the noise.
Æ
Emphasizes blue in shadow areas.
Deemphasizes blue in shadow areas.
*1
terminal is selected)
page 77)
-32 ~ +32