Precautions For Use; Lens Cushion; Cautions When Transporting; Cautions When Installing - Panasonic PT-FZ570 Operating Instructions Manual

Precautions for use

Lens cushion

f In order to protect the projection lens from the vibration during transportation, lens cushion is attached to the
product at the time of purchase. Please remove the lens cushion before use.

Cautions when transporting

f When transporting the projector, hold it securely by its bottom and avoid excessive vibration and impacts. They
may damage the internal components and result in malfunctions.
f Do not transport the projector with the adjustable feet extended. Doing so may damage the adjustable feet.
f Do not move or transport the projector with the wireless module (Model No.: ET-WML100) of the optional
accessories attached. Doing so may damage the wireless module.

Cautions when installing

rDo not set up the projector outdoors.
The projector is designed for indoor use only.
rDo not set up the projector in the following locations.
f Places where vibration and impacts occur such as in a car or vehicle: Doing so may cause damage to internal
components or malfunction.
f Locations near the sea or areas affected by corrosive gas: Corrosion may damage internal components or
cause the projector to malfunction.
f Near the exhaust of an air conditioner: Depending on the conditions of use, the screen may fluctuate in rare
cases due to the heated air from the air exhaust port or the hot or cooled air. Make sure that the exhaust
from the projector or other equipment, or the air from the air conditioner does not blow toward the front of the
projector.
f Near high-voltage power lines or near motors: Doing so may interfere with the operation of the projector.
f Places with sharp temperature fluctuations such as near lights (studio lamps): Doing so may shorten the life of
the lamp, or result in deformation of the outer case due to heat, which may cause malfunctions.
Follow the operating environment temperature of the projector.
rBe sure to ask a specialized technician or your dealer when installing the projector on
a ceiling.
The optional Ceiling Mount Bracket is required. Be sure to use the Projector Mount Bracket together with the
ceiling mount bracket for high ceilings or low ceilings.
Model No.:
 ET-PKD120H (for High Ceilings), ET-PKE300B (Projector Mount Bracket)
 ET-PKD120S (for Low Ceilings), ET-PKE300B (Projector Mount Bracket)
rAsk a qualified technician or your dealer to install the cable wiring for DIGITAL LINK
connection.
Image and sound may be disrupted if cable transmission characteristics cannot be obtained due to inadequate
installation.
Chapter 1 Preparation — Precautions for use
Lens cushion
ENGLISH - 17