Interrupting the Current Job to Make Priority
Copies
(Interrupt Mode)
The Interrupt mode enables you to interrupt the reserved or current job long enough to make
higher priority copies. This mode is useful when making a rush copy during a long copy job.
NOTE
•
You can make interrupt copies when the machine is ready to scan.
1
Press
When you want to copy after changing the Department ID while Department ID
Management is enabled, press
the Reference Guide.)
NOTE
•
Even when you press
until the interrupt copy starts printing.
2
Place your original, and set the desired copy mode.
NOTE
•
To cancel the Interrupt mode, press
•
To cancel all settings and return the machine to the Standard mode, press
3
Press
When the Interrupt copy job starts,
(Interrupt).
(ID) and enter the Department ID and Password. (See
(Interrupt), the job currently being output will not be interrupted
(Start).
(Interrupt) stops blinking.
Interrupting the Current Job to Make Priority Copies (Interrupt Mode)
(Interrupt).
1
(Reset).
1-69