Setting the Job Duration Display
When Job Duration Display is set to "On," the time remaining until completion of the copy job
(Job Duration Time) is indicated in minutes on the touch panel display.
NOTE
•
The job duration time is not displayed for the Transparency Interleaving, Cover/Sheet Insertion,
Different Size Originals, Rotate Collating, and Rotate Grouping modes or when the copy waiting time
is less than one minute.
•
The default setting is "Off."
1
Call up the desired screen as follows:
2
Select "On" or "Off," and press "OK."
3
Press "Done."
Repeat this procedure.
The selected mode is set and the display returns to the Basic Features screen.
(Additional Functions)
Setting the Job Duration Display
3
3-7