Job Duration Display
If the Job Duration Display mode is set to 'On', the remaining time that it takes to
complete an operation is displayed in minutes on the touch panel display.
NOTE
•
The wait time is displayed as <Approx Prt Time> (approximate printing time) on the
screen that is displayed when the machine is printing.
•
Even if Job Duration Display is set to 'On', the wait time is not displayed if the wait time is
less than one minute.
•
The default setting is 'Off' for all functions.
1
Press
If necessary, see the screen shot in step 1 of "Initial Function at Power ON," on p.
4-17.
2
Press [▼] or [▲] until [Job Duration Display] appears ➞ press
[Job Duration Display].
(Additional Functions) ➞ [Common Settings].
Specifying Common Settings
4
4-57