VJ-1624 QUICK REFERENCE
5.1.3.3
Standard Micro Adjustment Pattern
Check the confirmation pattern, and when the misalignment is small, perform micro adjustment.
Print a micro adjustment pattern and register the setting value.
1. Display the Adjust Print menu on the operation panel in the same way as in step 2 of "5.1.3.1
Standard Confirmation Pattern"
2. Press the [+] key or [-] key to select "Adj.3: Fine Pattern".
3. Press the [Enter] key on the operation panel.
•
"Warming Up", and then "Warming Up Skip -> E" are displayed.
NOTE
NOTE
• To start printing during warming up, press the [Enter] key while "Warming Up Skip -> E" is
displayed.
3.7.7 Start Printing during Warm up
•
An adjust print pattern for print quality adjustment is printed after warming up.
•
Regarding adjust print patterns, the same patterns are printed on both edges and the center of the
paper.
5-11
5 Troubleshooting