MUTOH ValueJet VJ-1624 Quick Reference page 90

3 Basic usage
9. Press the release buttons on both sides of spectrophotometer (SPECTROVUE VM-10), install it to
the connector at the print head.
1
No.
1
2
3
4
NOTE NOTE
• Make sure that spectrophotometer is NOT installed at an angle, and that there in no gap
between the connector and spectrophotometer.
10. Press the [Enter] key.
• "Wait for a while..." is displayed on the operation panel.
• The printer checks the connection between the printer and spectrophotometer.
• "Set white plate then close left maintenance cover." is displayed on the operation panel.
2
Spectrophotometer
Release buttons
Print head section
Connector
1
Name
3-60
VJ-1624 QUICK REFERENCE
3 4