Error Messages; Status Messages - MUTOH ValueJet VJ-1624 Quick Reference

VJ-1624 QUICK REFERENCE
5.4

Error messages

This section describes messages displayed during normal printer operation or when errors occur, and
solutions to the messages.
5.4.1

Status messages

This section describes messages displayed during printer normal operation.
When the product is operating correctly, each operation status is displayed on the operation panel as
below.
No. Display
1 Ready to Print
2 Media End
3 Receiving
4 Analyzing data
5 Printing
6 PrintRestart – > ENTER
7 Warming Up
8 Warming Up
Skip – > ENTER
9 Cleaning **%
10 Ink Refill **%
11 SubTank Refill **%
12 During Washing
13 Moving Origin Pos.
14 Confirm Position – >E
15 Head Cleaning
Description
Standby (Media is loaded).
Standby (Media is not loaded).
Receiving data.
Analyzing data.
Under printing.
Pausing printing.
Press the [Enter] key.
Warming up the heater.
Received the print data while the heater is
being heated.
To start printing before the heater is warmed
up, press the [Enter] key.
Cleaning the head.
Please wait a while.
Filling the ink.
Please wait a while.
Filling the subtank.
Please wait a while.
Washing the print head by the head washing
operation.
Please wait a while.
The print head is moving to the original
printing position in the Origin menu.
Please wait a while.
The print head is moving to the original
printing position in the Origin menu.
Press the [Enter] key.
Cleaning Head.
Wait for a moment.
5-39
5 Troubleshooting
Reference
—
3.5 Loading
media
—
—
—
—
3.7.7 Start
Printing during Warm
up
4.2.3 Head
cleaning
3.4 Installing ink
cartridges
3.4 Installing ink
cartridges
3.4 Installing ink
cartridges
"5.1.8 Origin
menu" in the
Operation Manual
"5.1.8 Origin
menu" in the
Operation Manual
"5.1.19
Longstore menu" in
the Operation Manual