Cleaning The Cleaning Wiper - MUTOH ValueJet VJ-1624 Quick Reference

VJ-1624 QUICK REFERENCE
3. Press the [>] key on the operation panel to select the cleaning mode.
4. Press the [Cleaning] key on the operation panel for at least two seconds.
• Start Head cleaning.
• "Cleaning **%" is displayed on the operation panel.
• After Head cleaning is complete, the operation panel shifts to Normal.
NOTE NOTE
• If you fail to remove blurs or incompleteness of printing in one Head cleaning, perform strong
cleaning.
• If blurs or lacking parts in printed media do not disappear with several times of Head cleaning,
refer to "5 Troubleshooting", and take appropriate measures.
4.2.4

Cleaning the cleaning wiper

This section describes the procedure to clean the cleaning wiper.
(1) Time for cleaning
Once a week, or when blurs or lacking parts appear on printed media after Head cleaning.
4-29
4 Daily maintenance