VJ-1624 QUICK REFERENCE
6. Rewind the roll media a little by rolling the flange on the roll media holder while holding the edge
of the media, and eliminate any slack or slant.
NOTE
NOTE
• If you set the roll media free while rewinding, the roll media will fall out from the media feed
slot on the rear of the product.
• Confirm that the right edge of the roll media does not go beyond the loading mark.
If it does, it may affect print quality.
No.
1
2
NOTE
NOTE
• When setting the roll media, set both sides of the media at least 5 mm away from the edge of
the pressurizing roller.
Slippage or creases may occur during printing.
Roll media
Media loading mark
Name
3-39
3 Basic usage
2
1
1