MUTOH ValueJet VJ-1624 Quick Reference page 118

4 Daily maintenance
8. Press the tab of the cutter lightly, return the cutter holder to its initial position.
NOTE NOTE
• Do not press the tab of the cutter strongly or suddenly let go of it.
There is a spring in the cutter holder and it may fly out.
• Do not push the cutter all the way in.
The cutter blade may damage the inside of the printer.
• Refer to the illustrations below and install the cutter holder correctly.
If it is not installed correctly, it may cause an error.
If an error occurs, check if the cutter holder is installed correctly.
No.
1
2
Cutter holder
Cutter holder lever
1
Name
4-22
VJ-1624 QUICK REFERENCE
2