MUTOH ValueJet VJ-1624 Quick Reference page 126

4 Daily maintenance
(2) Cleaning procedures
Follow the procedure below to clean the cleaning wiper.
NOTE NOTE
• Use the cleaning stick to clean the cleaning wiper.
For cleaning stick, refer to "8.3 Options/Supply list" in the Operation Manual.
1. If the printer is turned ON, make sure the following.
• Printing or other operations are not in progress.
• The operation panel display is Normal.
2. Display the CR Maintenance menu on the operation panel.
a. Press the [Menu] key on the operation panel.
• "Menu1: Setup>" is displayed on the operation panel.
• The operation panel shifts to the Setup menu display.
b. Press the [>] key on the operation panel.
• "Set1: User Type" is displayed on the operation panel.
4-30
VJ-1624 QUICK REFERENCE