MUTOH ValueJet VJ-1624 Quick Reference page 71

VJ-1624 QUICK REFERENCE
7. If the edge of the roll media is set less than 5 mm from the edge of the pressurizing roller, follow the
procedure below to adjust the position of the roll media.
a. Loosen the fixing levers of the right and left roll media holders, and move the roll media to left
or right.
b. After moving the roll media, fix it with fixing levers of the right and left roll media holders.
NOTE NOTE
• Fix the roll media holders by pressing the holders to the printer.
1
1
No.
1
2
3
4
3
4
Roll media holder (Left)
Roll media holder (Right)
Roll media
Fixing lever
3
Name
3-41
3 Basic usage
2
3
4
2