Troubleshooting; Problems In Installation And Introduction - MUTOH ValueJet VJ-1624 Quick Reference

VJ-1624 QUICK REFERENCE
5.3

Troubleshooting

This section describes undisplayed malfunctions and failures of the printer, possible causes and
countermeasures.
5.3.1

Problems in installation and introduction

(1) Cannot perform the initial ink charge
No. Possible cause
1 Is the front cover open or media loading lever
raised?
2 Is the maintenance cover open?
3 Are all four color ink cartridges fully inserted? Fully insert all four color ink cartridges.
(2) Ink does not come out after initial ink charge
No. Possible cause
1 Is the ink cartridge cold and frozen?
2 Was the power turned OFF during initial ink
charge?
3 Occasionally, normal printing cannot be
performed after initial ink charge.
Remedy
Close the front cover, or lower the media
loading lever.
Close the maintenance cover.
Remedy
Leave the ink bag at room temperature for at
least three hours, and perform cleaning
several times.
Turn the power ON again and continue initial
ink charge.
Perform cleaning several times, and check it
every time.
5-31
5 Troubleshooting
Reference
3.5 Loading
media
4.2.4 Cleaning
the cleaning wiper
4.2.5 Cleaning
around the print head
3.4 Installing ink
cartridges
Reference
4.2.3 Head
cleaning
3.4 Installing ink
cartridges
4.2.3 Head
cleaning