MUTOH ValueJet VJ-1624 Quick Reference page 177

VJ-1624 QUICK REFERENCE
No. Possible cause
6 Is the temperature setting of each heater
appropriate?
7 Is the head height set to High?
(4) White or black lines appear on printed media
No. Possible cause
1 Are you using the recommended media?
2 Is the roll media loaded correctly?
3 Is the nozzle in good condition?
4 Did you perform Alignment?
5 Did you perform Media feed compensation?
6 Is the temperature setting of each heater
appropriate?
7 Is the head height set to High?
(5) Printing lines are not straight
No. Possible cause
1 Is the ink cartridge within the validity period? Use a new ink cartridge.
2 Are you using the recommended media?
3 Did you perform Alignment?
4 Did you perform Media feed compensation?
Remedy
Set the temperature appropriately.
Return the head height to "Low".
Remedy
Use the recommended media.
Load the roll media correctly.
Perform Head cleaning.
Perform Alignment.
Perform Media feed compensation.
Set the temperature appropriately.
Return the head height to "Low".
Remedy
Use the recommended media.
Perform Alignment.
Perform Media feed compensation.
5-37
5 Troubleshooting
Reference
"5 Panel setup
menu" in the
Operation Manual
"4.2.5 Head
height adjustment" in
the Operation Manual
Reference
"4.2.1 Media
type" in the Operation
Manual
3.5.1 Loading
roll media
4.2.3 Head
cleaning
5.1.2 Adjust the
print head
"4.2.6 Media
feed compensation"
in the Operation
Manual
"5 Panel setup
menu" in the
Operation Manual
"4.2.5 Head
height adjustment" in
the Operation Manual
Reference
4.1.1 Replacing
ink cartridges
"4.2.1 Media
type" in the Operation
Manual
5.1.2 Adjust the
print head
"4.2.6 Media
feed compensation"
in the Operation
Manual