Replacing The Flushing-Box Sponges - MUTOH ValueJet VJ-1624 Quick Reference

4 Daily maintenance
5. Shake the high capacity pack adapter gently two to three times and insert it to the slot.
NOTE NOTE
• Make sure that the ink pack and smart chip are installed on the high capacity pack adapter
before inserting it to the slot. If the high capacity pack adapter is inserted into the slot without
the ink pack, the remaining information will be rewritten and the ink pack will not be usable.
• Insert the high capacity pack adapter all the way to the end of the slot.
6. Confirm that the operation panel returns to Normal.
NOTE NOTE
• If the high capacity pack adapter is replaced during a print job, the printer resumes printing.
• Replacing the high capacity pack adapter is complete.
CAUTION
After installing the high capacity pack adapter, make sure to perform initial ink
charge from the Cleaning menu in the following case.
• When using the high capacity pack adapter for the printer whose ink is charged
for the first time
• When the high capacity pack adapter has been used, and after replacing it with
a new one and installing it to the printer
If you use the high capacity pack adapter without performing initial ink charge, the
air inside the high capacity pack adapter goes into the printer ink tube and may
cause nozzle clogging.
"5.3 Cleaning menu" in the Operation Manual
4.1.2

Replacing the flushing-box sponges

This section explains how to replace the flushing-box sponges.
(1) Replacement time
Replace the flushing-box sponges in the following situations.
a. When the flushing-box sponge is deformed
b. When the ink is spattered on the media
c. When more than two months have passed since the last replacement
VJ-1624 QUICK REFERENCE
4-8