Configuring Basic Mgcp Parameters - 3Com VCX v7111 Installation Manual

The following sections from here up to and including "Configuring Basic SIP
Parameters" on page 36 apply individually to MGCP, H.323, or SIP.
MGCP Configuring continues with "Configuring Basic MGCP Parameters"
on page 33.
H.323 Configuring continues with "Configuring Basic H.323 Parameters"
on page 34.
SIP Configuring continues with "Configuring Basic SIP Parameters"
on page 36.

Configuring Basic MGCP Parameters

After accessing the Embedded Web Server (see "Accessing the Embedded Web Server" on
page 31) the MGCP 'Quick Setup' screen is displayed (Figure 17).
VCX V7111 MGCP Quick Setup Screen
Figure 17
To configure basic MGCP parameters, follow these steps:
If your network features a DNS server, in the fields 'DNS Primary Server IP' and 'DNS
1
Secondary Server IP', enter the IP address of the primary and secondary DNS servers
(clarify with your network administrator). Note that the DNS server option is not
supported by MGCP.
3Com VCX V7111 Fast Track Installation Guide 33