3Com VCX v7111 Installation Manual page 56

Auxiliary Files Screen
Figure 31
To save the loaded auxiliary files to flash memory, follow these steps:
Click the Save Configuration button on the main menu bar; the 'Save Configuration to
1
the Flash Memory' screen is displayed.
Saving an auxiliary file to flash memory may disrupt traffic on the device. To avoid
this, disable all traffic on the device before saving to flash memory.
Click the Save Configuration button in the middle of the screen; a confirmation
2
message appears when the save is complete.
A device reset is required to activate a loaded CPT file, and may be required for
the activation of certain ini file parameters.
To reset the VCX V711, follow these steps:
Click the Reset button on the main menu bar; the 'Reset' screen is displayed.
1
Click the Reset button in the middle of the screen; the auxiliary files are saved into flash
2
and the VCX V7111 restarts. This takes approximately 1 minute to complete. When the
VCX V7111 has finished restarting, the Ready and LAN LEDs on the front panel are lit
green.
56 3Com VCX V7111 Fast Track Installation Guide