Start Software Upgrade Screen
Figure 24
At this point, the process can be canceled with no consequence to the device
(click the Cancel button). If you continue the process (by clicking the Start
Software Upgrade button), the process must be followed through and completed
with a device reset at the end. If you click the Cancel button in any of the
consequent screens, the device is automatically reset with the configuration that
was previously burned in flash memory.
Click the Start Software Upgrade button; the 'Load a cmp file' screen appears
3
(Figure 25 on page 51).
When in the Wizard process, the rest of the Web application is unavailable and the
background Web screen is disabled. After the process is completed, access to the
full Web application is restored.
50
3Com VCX V7111 Fast Track Installation Guide