Chapter 4: Changing The; Assword And Username - 3Com VCX v7111 Installation Manual

C 4: C
HAPTER
P
ASSWORD AND
The following sections from here to the end of this installation guide apply equally
to MGCP, H.323, and SIP.
To prevent unauthorized access to the VCX V7111, it is recommended that you change the
username and password that are used to access the Embedded Web Server.
To change the username and password, follow these steps
Access the Embedded Web Server (see "Accessing the Embedded Web Server" on
1
page 31).
Open the 'Change Password' screen (Advanced Configuration menu > Change
2
Password); the 'Change Password' screen is displayed.
Change Password Screen
Figure 21
In the 'User Name' and 'New Password' fields, enter the new username and the new
3
password, respectively. Note that the username and password can be a maximum of 7
case-sensitive characters.
In the 'Confirm Password' field, reenter the new password.
4
Click the Change Password button; the new username and password are applied and
5
the 'Enter Network Password' screen appears, shown in Figure 16 on page 32.
Enter the updated username and password in the 'Enter Network Password' screen.
6
3Com VCX V7111 Fast Track Installation Guide
HANGING THE
U
SERNAME
VCX V7111
41