Table of Contents
Advertisement
NTI UNIMUX SINGLE-USER HIGH DENSITY VGA USB KVM SWITCH
User Access Control
To enter the Access Control list for a user, press A from the User Account screen for that user. From the Access Control list the
administrator can:
select all ports to have access to
•
deselect all ports so that none can be connected to
•
select only a limited number of ports to be accessed
•
The Access Control list is a check list with all the port numbers displayed
• unchecked box = the corresponding port is not in the access list
• checked box
= the corresponding port is in the access list
Function
Toggle the state of the selected
check box
Select the next or previous port
Quickly place check marks in all
boxes
Quickly remove check marks from all
boxes
Open Help window for this topic
Exit and return to previous menu
Changes made will be saved
automatically
Change Administrator Password
To change the Administrator Password, press <C> from the Administration menu.
The Admin Password menu (see Figure 28) enables the administrator to change his password. Two edit fields are available, one
for password, the other for verify password.
Note: The default password for the administrator is "nti".
Function
Switch between Password and
Confirm (password) fields
Add character to password string
or confirm string
Delete previous character in
edited string
Save new password. (The
administrator will be prompted
for a Yes or No confirmation)
Exit and return to previous menu
Note: If the confirmation password does not match the first password entered, the message "INVALID PASSWORD" will
be displayed when you try to save it.
Keystroke
Spacebar
up or down arrow
A
N
F1
Esc
The password can be up to 15 characters in length.
Keystroke
Tab
A-Z, 0-9
(upper or lower case)
Backspace
S
Esc
24
Figure 27- Access Control list
Figure 28- Administrator password menu
Advertisement
Table of Contents
