Adding An External Modem - Netopia R2020 User Reference Manual

4-4 User's Reference Guide
If you add devices connected through a hub, connect the hub to Ethernet port number 1 on the Netopia R2020
and set the Normal/Uplink switch to Uplink.
PC

Adding an external modem

You may wish to add a third (external) modem to gain additional speed for your Internet connection. You will
need to obtain the special external modem cable either from your reseller or directly from Netopia. Refer to the
sheet of optional feature set add-ons in your Netopia R2020 documentation folio.
Netopia R2020 Auxiliary port for connecting a third modem
Ethernet
By default, the Auxiliary port on your Netopia R2020 is enabled for an external asynchronous modem. This
means that all you have to do is connect your modem to the Auxiliary port and configure its settings in the Line
Configuration screens under the WAN Configuration menu. For detailed configuration instructions see
"Specifying telephone connections" on page
8
Ethernet
Macintosh
PC
8 7 6 5
4 3 2 1
Telco 2
Normal/Uplink
1
Auxiliary connection port
HD-15 (female)
8-1.
1
Nor-
10Base-T
Hub
Auxiliary Console Power
Telco 1