Netopia R2020 User Reference Manual page 66

7-4 User's Reference Guide
Address Translation Enabled:
IP Addressing...
NAT Rule List...
NAT Server List...
Local WAN IP Address:
Local WAN IP Mask:
Remote IP Address:
Remote IP Mask:
Filter Set...
Remove Filter Set
Receive RIP:
Toggle to Yes if this is a single IP address ISP account.
Configure IP requirements for a remote network connection here.
6. Toggle or enter any IP Parameters you require and return to the Add Connection Profile screen by pressing
Escape. For more information, see
7. If you will be connecting with an IPX remote network, toggle IPX Enabled to Yes, and press Return.
Otherwise, accept the default No.
If you enable IPX routing, an IPX Profile Parameters menu item becomes available. Select IPX Profile
Parameters and press Return. The IPX Profile Parameters screen appears.
Remote IPX Network:
Path Delay:
NetBios Packet Forwarding:
Incoming Packet Filter Set...
Outgoing Packet Filter Set...
Incoming SAP Filter Set...
Outgoing SAP Filter Set...
Periodic RIP Timer:
Periodic SAP Timer:
Configure IPX requirements for a remote network connection here.
8. Toggle or enter any IPX Parameters you require and return to the Add Connection Profile screen by pressing
Escape. For more information, see
IP Profile Parameters
Yes
Numbered
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
Both
"Multiple Network Address Translation and IP Setup" on page
IPX Profile Parameters
"IPX Setup" on page 11-1.
00000000
10
Off
<<NONE>>
<<NONE>>
<<NONE>>
<<NONE>>
60
60
10-1.