Netopia R2020 User Reference Manual page 132

10-6 User's Reference Guide
Ethernet IP Address:
Ethernet Subnet Mask:
Define Additional Subnets...
Default IP Gateway:
Primary Domain Name Server:
Domain Name:
Receive RIP:
Transmit RIP:
Static Routes...
IP Address Serving Setup
Network Address Translation (NAT)...
Filter Sets...
Enter an IP address in decimal and dot form (xxx.xxx.xxx.xxx).
Set up the basic IP attributes of your Netopia in this screen.
Select Network Address Translation (NAT) and press Return.
The Network Address Translation screen appears.
Return/Enter to configure IP Address redirection.
Public Range: defines an external address range and indicates what type of remapping to apply when using this
range. The types of remapping available are static and pat .
Map Lists: define collections of mapping rules. A rule maps interior range addresses to exterior range
addresses by the mapping techniques defined in the map list.
Server Lists: bind internal IP addresses and ports to external IP addresses and ports so that connections
initiated from the outside can access an interior server.
IP Setup
Network Address Translation
Add Public Range...
Show/Change Public Range...
Delete Public Range...
Add Map List...
Show/Change Map List...
Delete Map List...
Add Server List...
Show/Change Server List...
Delete Server List...
NAT Associations...
192.168.1.1
255.255.255.0
0.0.0.0
0.0.0.0
Both
Off