Netopia R2020 User Reference Manual page 135

Select First and Last Private Address and enter the first and last interior IP addresses you want to assign
to this mapping.
Select Use NAT Public Range and press Return. A screen appears displaying the public ranges you have
defined.
+-Public Address Range------------Type----Name-------------+
+----------------------------------------------------------+
| 0.0.0.0
| 1.1.1.1
| 2.2.2.2
| <<NEW RANGE...>>
|
|
|
|
|
|
|
|
|
|
|
|
+----------------------------------------------------------+
Up/Down Arrow Keys to select, ESC to cancel, Return/Enter to Delete.
From the list of public ranges you defined, select the one that you want to map to the interior range for this
mapping and press Return.
If none of your preconfigured ranges are suitable for this mapping, you can select <<NEW RANGE>> and
create a new range. If you choose <<NEW RANGE>>, the Add NAT Public Range screen displays and you
can create a new public range to be used by this map. See
The Add NAT Map screen now displays the range you have assigned.
Multiple Network Address Translation and IP Setup 10-9
Add NAT Map ("my_map")
-- pat
-- pat
3.3.3.3 static
Easy-PAT
my_first_range
my_second_range
"Add NAT Public Range" on page
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
10-7.