Viewing Or Editing Connection Profiles - Netopia R2020 User Reference Manual

9. Select Telco Options and press return. the Telco Options screen appears.
NOTE: If you are creating a VPN Connection Profile, the Telco Options menu is not used and becomes
unavailable.
Dial...
Dialing Prefix:
Number to Dial:
Alternate Site to Dial:
Dial on Demand:
Idle Timeout (seconds):
CNA Validation Number:
Callback:
Return/Enter to allow dialing out, dialing in, or both.
In this Screen you configure options for the ways you will establish a link.
Select Dial and press Return. A pop-up menu appears. You can select the dialing options for this
Connection Profile as Dial In Only, Dial Out Only, or Dial In/Out.
You can:
add a dialing prefix, such as "9" for an outside line on a PBX or Centrex phone system.
add the number to dial for this Connection Profile
add an alternate number to use if the first number fails to connect
change any of the default parameter settings
When you are finished with these entries, press Escape to return to the Add Connection Profile screen.
10. Select ADD PROFILE NOW and press Return. Your new Connection Profile will be added.
Viewing or editing connection profiles
If you want to view or edit the connection profiles in your router, return to the WAN Configuration screen, and
select Display/Change Connection Profile. The list of Connection Profiles is displayed in a scrolling pop-up
screen.
Telco Options
Dial In/Out
Yes
300
No
WAN and System Configuration 7-5