Netopia R2020 User Reference Manual page 71

To help you determine whether you need to use the System Configuration options, review the following
requirements. If you have one or more of these needs, use the System Configuration options described in the
later chapters.
Two or more outgoing connection profiles to connect to more than one remote location (for example, to
connect to the Internet and to a network at another office).
System Configuration of dynamic IP address distribution through DHCP, MacIP, or BootP.
Customized incoming call profile to control received calls.
Scheduled connections.
Greater network security through the use of filters, CallerID, callback, and SecurID.
System Configuration of AppleTalk LAN settings.
System Configuration of connections to AppleTalk networks through the Internet or any IP network, using
AURP (AppleTalk "tunneling").
System Configuration of connection profiles. See the table below for a partial list of the options available
through System Configuration.
Layer Category
Protocol Layer
Datalink Layer
Parameter Type
IP Parameters
IPX Parameters
PPP/MP Parameters
WAN and System Configuration 7-9
Options
Filter Sets:
Receive RIP:
Transmit RIP:
Path Delay:
NetBios Packet Forwarding:
Incoming/outgoing Packet &
SAP filter:
Periodic RIP/SAP timers:
Data Compression:
Send Authentication:
Channel Usage:
Bandwidth Allocation:
Maximum Packet Size:
Default settings
Basic Firewall
NetBIOS Filter
Both
Off
1 second
No
On
60 seconds
Standard LZS
PAP
Dynamic
BAP
1500