Netopia R2020 User Reference Manual page 162

Dual analog router
Table of Contents

Advertisement

10-36 User's Reference Guide
To go to the IP Address Serving screen, select IP Address Serving in the System Configuration screen and
press Return.
Number of Client IP Addresses:
1st Client Address:
Client Default Gateway...
Serve DHCP Clients:
DHCP NetBios Options...
Serve BOOTP Clients:
Serve Dynamic WAN Clients
Serve MacIP/KIP Clients:
MacIP/KIP Static Options...
Enter the maximum number of dynamic IP clients to support.
Configure Address Serving (DHCP, BOOTP, etc.) here.
Follow these steps to configure IP Address Serving:
If you enabled IP Address Serving either by using SmartStart or in Easy Setup, DHCP, BootP clients,
Dynamic WAN clients, and MacIP/KIP clients (if you have the AppleTalk kit installed) are automatically
enabled.
Select Number of Client IP Addresses and enter the total number of contiguous IP addresses that the
Netopia R2020 will distribute to the client machines on your local area network.
In the screen example shown above, five Client IP addresses have been allocated.
Select 1st Client Address and enter the first client IP address that you will allocate to your first client
machine. For instance, on your local area network you may first want to figure out what machines are going
to be allocated specific static IP addresses so that you can determine the pool of IP addresses that you will
be serving addresses from via DHCP, BOOTP, Dynamic WAN, and/or MacIP.
Example: Your ISP has given your Netopia R2020 the IP address 192.168.6.137, with a subnet mask of
255.255.255.248. The subnet mask allocated will give you six IP addresses to use when connecting to the
ISP over the Internet (for more information on understanding IP addressing refer to
"Understanding IP
enter 192.168.6.138 as the 1st client address, as the router itself must have an IP address.
To enable DHCP, select Serve DHCP Clients and toggle it to Yes. DHCP serving is automatic when IP
Address Serving is enabled.
IP Address Serving
Addressing."). Your address range will be from .137-.143. In this example you would
5
192.168.6.138
192.168.6.137
Yes
Yes
Yes
Yes
Appendix C,

Advertisement

Table of Contents
loading

Table of Contents