Dial-In Console Access - Netopia R2020 User Reference Manual

To display a view-only list of user accounts, select Show Users in the Security Options screen.
To add a new user account, select Add User in the Security Options screen and press Return to go to the Add
Name With Write Access screen.
Enter Name:
Enter Password (11 characters max):
ADD NAME/PASSWORD NOW
Follow these steps to configure the new account:
1. Select Enter Name and enter a descriptive name (for example, the user's first name).
2. Select Enter Password and enter a password.
3. To accept the new name/password combination, select ADD NAME/PASSWORD NOW. To exit the Add
Name With Write Access screen without saving the new account, select CANCEL.
To delete a user account, select Delete User to display a list of accounts. Select an account from the list and
press Return to delete it. To exit the list without deleting the selected account, press the Escape key.

Dial-in Console Access

Remote modem terminal emulator setups can dial in to either internal modem line and establish a remote
console session, even though they are not using PPP. This allows Netopia Inc.'s "Up and Running, Guaranteed!"
department or other administrator with the appropriate security to remotely configure your router for you. If you
used SmartStart to configure your router, this option will be set to "No".
To prevent any remote caller from establishing a remote session, leave the option Enable Dial-in Console
Access set to "No".
To allow access for Up and Running, Guaranteed! with the default name and password in place, toggle this
option to "Yes".
Add Name With Write Access
CANCEL
Security 14-3