Netopia R2020 User Reference Manual page 185

Site A has an AURP tunnel to site B. Both sides have multiple zones defined on the EtherTalk port and a unique
zone on their LocalTalk ports. If side A has indicated one of its EtherTalk zones is the Free Trade Zone and has
opted to use the Free Trade Zone option for its tunnel to B, then only this Free Trade Zone will show up on side
B and only those machines or services in the Free Trade Zone will be accessible to side B. All of side A will be
able to see all of side B.
Adding an AURP partner
To add a new AURP partner, select Add Partner and press Return to go to the Add AURP Partner screen.
Partner IP Address or Domain Name:
Initiate Connection:
Restrict to Free Trade Zone:
ADD PARTNER NOW
Enter Information about new Partner.
Select Partner IP Address or Domain Name and enter the new AURP partner's IP address. If you do not
know the remote network's IP address, enter its domain name. Domain names are the Internet addresses
favored by people (for example, chagall.arts.edu). Domain names are matched to the IP addresses actually
used by IP routers (for example, 163.7.8.202).
To initiate a connection with an AURP partner, select Initiate Connection and toggle it to Yes. This will open
a connection to the remote AppleTalk network after rebooting.
You can choose to restrict this partner to the Free Trade Zone by toggling Restrict to Free Trade Zone to
Yes. See "AURP Free Trade Zone" on page 12-8
To add the new AURP partner, select ADD PARTNER NOW. To discard the new AURP partner, select
CANCEL.
Modifying an AURP partner
To modify an AURP partner, select Display/Change Partner in the AURP Setup screen and press Return to
display a table of existing partners.
Use the Up and Down Arrow keys to select a partner, then press Return to go to the Change AURP Partner
screen.
Add AURP Partner
No
No
CANCEL
for more information.
AppleTalk Setup 12-9