Netopia R2020 User Reference Manual page 213

Putting the parts together
When you display a filter set, its filters are displayed as rows in a table:
+-#---Source IP Addr---Dest IP Addr-----Proto-Src.Port-D.Port--On?-Fwd-+
+----------------------------------------------------------------------+
| 1 192.211.211.17
| 2 0.0.0.0
| 3 0.0.0.0
| 4 0.0.0.0
| 5 0.0.0.0
|
|
|
|
|
|
|
|
|
|
|
+----------------------------------------------------------------------+
The table's columns correspond to each filter's attributes:
#: The filter's priority in the set. Filter number 1, with the highest priority, is first in the table.
Source IP Addr: The packet source IP address to match.
Dest IP Addr: The packet destination IP address to match.
Proto: The protocol to match. This can be entered as a number (see the table below) or as TCP or UDP if using
those protocols.
Src. Port: The source port to match. This is the port on the sending host that originated the packet.
D. Port: The destination port to match. This is the port on the receiving host for which the packet is intended.
On?: Displays Yes when the filter is in effect or No when it is not.
Fwd: Shows whether the filter forwards (Yes) a packet or discards (No) it when there's a match.
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
Protocol Number to use
N/A 0
ICMP 1
TCP 6
UDP 17
TCP 0
TCP NC
ICMP --
TCP NC
UDP NC
Full name
Ignores protocol type
Internet Control Message Protocol
Transmission Control Protocol
User Datagram Protocol
Security 14-9
23 Yes No |
=6000 Yes No |
-- Yes Yes |
>1023 Yes Yes |
>1023 Yes Yes |
|
|
|
|
|
|
|
|
|
|
|