Netopia R2020 User Reference Manual page 147

The Default Answer Profile screen appears.
Must Match a Defined Profile:
IP Enabled:
IP Parameters...
IPX Enabled:
Data Compression...
Max. Receive Packet Size:
Idle Timeout:
Return/Enter accepts * Tab toggles * ESC cancels.
Configure values which may be used when receiving a call in this screen.
If Must Match a Defined Profile is set to Yes, then the NAT attributes of the Connection Profile take
precedence. If you toggle Must Match a Defined Profile to No, IP-related menu options become visible.
Select IP Parameters and press Return. The IP Parameters (Default Answer Profile) screen appears.
Filter Set (Firewall)...
Remove Filter Set
Address Translation Enabled:
Interface IP Address:
NAT Map List...
NAT Server List...
Receive RIP:
Transmit RIP:
Return/Enter to select a Firewall Filter Set for incoming calls.
Configure IP values to use when no matching Profile can be found.
You can then bind NAT Map Lists and NAT Server Lists in the same fashion as described in the section
profile parameters" on page
Default Answer Profile
IP Parameters (Default Answer Profile)
10-18.
Multiple Network Address Translation and IP Setup 10-21
No
Yes
No
Standard LZS
1500
300
Yes
0.0.0.0
Both
Off
"IP