Netopia R2020 User Reference Manual page 151

Enter your ISP-supplied values as shown below.
Connection Profile Name:
Address Translation Enabled:
IP Addressing...
Local WAN IP Address:
Local WAN IP Mask:
PREVIOUS SCREEN
Enter a subnet mask in decimal and dot form (xxx.xxx.xxx.xxx).
Enter basic information about your WAN connection with this screen.
Select NEXT SCREEN and press Return.
Your IP values are shown here.
Ethernet IP Address:
Ethernet Subnet Mask:
Domain Name:
Primary Domain Name Server:
Secondary Domain Name Server:
Default IP Gateway:
IP Address Serving:
Number of Client IP Addresses:
1st Client Address:
PREVIOUS SCREEN
Set up the basic IP & IPX attributes of your Netopia in this screen.
Then navigate to the Network Address Translation (NAT) screen.
Main
Menu
Connection Profile 1: Easy Setup Profile
IP Easy Setup
System
Configuration
Multiple Network Address Translation and IP Setup 10-25
Easy Setup Profile
Yes
Numbered
173.166.100.34
255.255.255.252
NEXT SCREEN
192.168.1.1
255.255.255.0
ISP.net
173.166.101.1
173.166.102.1
173.166.100.33
On
248
192.168.1.6
NEXT SCREEN
Network
Protocols Setup
IP Network Address
Setup Translation (NAT)