Table of Contents
Advertisement
Safety
2
This chapter contains basic information for your safety. Read the instruc-
tions carefully before setting up or operating the machine. Make sure to
follow the information included in the safety instructions. Failure to do so
can result in serious injury and property damage.
2.1 Basic safety instructions
The machine may only be used as described in these instructions.
The instructions should be available at the machine's location at all times.
Work on live components and equipment is prohibited. Exceptions are de-
fined in the DIN VDE 0105.
For the following work, the machine must be disconnected from the power
supply using the main switch or by disconnecting the power plug:
Missing or faulty parts could impair safety and damage the machine.
Therefore only use original parts from the manufacturer.
Use a lifting carriage or forklift to transport the machine. Raise the machine
Transport
max. 20 mm and secure it to prevent it from slipping off.
The connecting cable must have a power plug approved in the relevant
Setup
country. The power plug may only be connected to the power cable by
qualified specialists.
Follow the country-specific safety and accident prevention regulations and
Obligations
of the operator
the legal regulations concerning industrial safety and the protection of the
environment.
All the warnings and safety signs on the machine must always be in legible
condition, and must not be removed. Missing or damaged labels must be
replaced immediately.
The machine may only be set up by qualified specialists.
Requirements
to be met by
the personnel
Maintenance work and repairs may only be carried out by qualified
specialists.
Work on electrical equipment may only be carried out by qualified specialists.
Only authorized persons may work on the machine. Every person who
works on the machine must first have understood these instructions.
Service Instructions 667 - 00.0 - 04/2016
Safety
• Replacing the needle or other sewing tools
• Leaving the workstation
• Performing maintenance work and repairs
• Threading
5
Advertisement
Table of Contents
