Maintenance - DURKOPP ADLER M-TYPE 667 Service Instructions Manual

Maintenance

16 Maintenance
This chapter describes maintenance work that needs to be carried out on
a regular basis to extend the service life of the machine and achieve the
desired seam quality.
Maintenance interval
Work to be carried out
Cleaning
Removing lint and thread remnants
Cleaning the motor fan mesh
Lubricating
Lubricating the machine head
Lubricating the hook
Servicing the pneumatic system
Checking the operating pressure
Draining the water condensation
Cleaning the filter element
Servicing specific components
Checking the toothed belt
Service Instructions 667 - 00.0 - 04/2016
WARNING
Risk of injury from sharp parts!
Punctures and cutting possible.
Prior to any maintenance work, switch off the
machine or set the machine to threading mode.
WARNING
Risk of injury from moving parts!
Crushing possible.
Prior to any maintenance work, switch off the
machine or set the machine to threading mode.
Operating hours
8 40 160 500








73