Information
Additional information, e.g. on alternative operating options.
Order
Specifies the work to be performed before or after a setting.
References
Reference to another section in these instructions.
Important warnings for the user of the machine are specifically marked.
Safety
Since safety is of particular importance, hazard symbols, levels of danger
and their signal words are described separately in 2 Safety.
If no other clear location information is used in a figure, indications of right
Location
information
or left are always from the user's point of view.
1.3 Other documents
The device contains built-in components from other manufacturers.
Each manufacturer has performed a hazard assessment for these
purchased parts and confirmed their design compliance with applicable
European and national regulations. The proper use of the built-in compo-
nents is described in the corresponding manufacturer's instructions.
1.4 Liability
All information in these service instructions was compiled in accordance
with the current state of the art and the applicable standards and
regulations.
The manufacturer cannot be held liable for damages resulting from:
4
• Breakage and damage during transport
• Failure to follow the operating instructions
• Improper use
• Unauthorized modifications to the machine
• Use of untrained personnel
• Use of unapproved parts
About these service instructions
Service Instructions 667 - 00.0 - 04/2016