Table of Contents
Advertisement
Winder
To set the winder run:
1. Loosen the threaded pin (8).
2. Set the switch cam (9) such that it is just contacting the leaf spring (10)
3. Set the switch cam (9) such that the winder lever (3) has no axial play.
4. Tighten the threaded pin (8).
Installing the winder
Fig. 45: Installing the winder
(1) - Screws
To install the winder:
1. Place the winder on the machine arm.
2. Tighten the screws (1).
Service Instructions 667 - 00.0 - 04/2016
when the block (5) has engaged in the locking disk.
(15) - Marking for XXL hook
63
Advertisement
Table of Contents
