Setting The Handwheel Into Position - DURKOPP ADLER M-TYPE 667 Service Instructions Manual

Working basis

3.6 Setting the handwheel into position

For some settings, the graduated scale on the handwheel has to be moved
to a certain position.
Fig. 10: Setting the handwheel into position
①
②
(1) - Graduated (2) - Marking
scale
To set the handwheel into position:
1. Turn the handwheel until the specified number on the graduated
scale (1) is next to the marking (2).
18 Service Instructions 667 - 00.0 - 04/2016